New products

€29.90
The JAMMA2Terminal adapter goes between the JAMMA conn of your arcade cabinet / Bartop , it can also be used to adapt a none JAMMA game or to replace the JAMMA conn of your bartop / arcade cabinet ,all of that without soldering
It can also manage 6 buttons extended JAMMA systems ( Xin1 like pandora's box and kick harness )
The PCB has been designed to link everything you want to your cabinet without any soldering :

Wire your buttons , place extra buttons , place a permanent kick harness , had some Leds or other lights , connect a second monitor , re-wire your monitor , connect new speakers , power supply your cabinet with +5V / -5V / +12V , upgrade the GND , do a supergun proto , build an arcade cabinet / bartop .... This simple multi-purpose PCB simplify your work !
€13.90
Power Distribution 2 X 12 screw Terminal Blocks 16A with voltmeter included
+ 1 power supply Barrel Jack 5.5 X 2.1mm ,the most standard to plug in any kind of power supply
+ 1 terminal with 2 blocks that can be used as an input or an output power supply ( to wire it using 2 directly 2 wires or to daisy chain a couple of them ,let's see below for examples of use )  
The integrated voltmeter can handle about 3 to 30 VDC, Alternative current isn't supported; it can be removed and used everywhere if needed as it's only wired to its dedicated screw terminal block
It's mutipurpose and can be used everywhere including arcade cabinets,models,industry,etc...
€8.90
Power Distribution screw Terminal Blocks (other colors are available please check my other sales )
- 20 X Connectors 16A for multi purposes including industry,arcade cabinets,flight simulators,aviation in miniature,model boats,etc....
All terminal blocks are wired together so then an input current in one of them will be split to all others 
So you'll obtain : 1 X Input - 19 X Outputs

€14.92
In stock
The basic cartridge originally supplied with the CPC+ 464 and 6128 , it's paramount if you want to access to your floppy drive / DataCorder and obviously the basic. Without it,your computer is just a simple GX4000 .
It's a bootleg that works exactly as the one originally supplied with the CPC+ . Just plug it into the cartridge port ,switch it on and press f1 for Locomotive Basic / f2 for Burnin' Rubber 
This one is dedicated to UK QWERTY keyboard
€14.92
In stock
The basic cartridge originally supplied with the CPC+ 464 and 6128 , it's paramount if you want to access to your floppy drive / DataCorder and obviously the basic. Without it,your computer is just a simple GX4000 .
It's a bootleg that works exactly as the one originally supplied with the CPC+ . Just plug it into the cartridge port ,switch it on and press f1 for Locomotive Basic / f2 for Burnin' Rubber 
This one is dedicated to french AZERTY keyboard, if you have a UK keyboard ( QWERTY ) please don't take this one or when you'll press the Q key you'll have an A.
€14.92
In stock
Arnold5 V1.3 Plug an Play Rom Diagnostic cartridge for Amstrad CPC 464+ , 6128+ and GX4000 systems 
Plug and Play,just plug in into the cartridge port and switch on the system like any other cartridge game
Perfect to ensure that your Amstrad works well and to repair it if needed
Using it,you can simply do a deep diagnostic of about all components of the system :
RAM,DMA,floppy drive, DataCorder,printer port,joystick port,keyboard,factory tests,etc....
( please take a look at pictures 3 and 4 )