Power Distribution screw Terminal Blocks 16A voltmeter included

Power Distribution screw Terminal Blocks 16A voltmeter included

Power Distribution 2 X 12 screw Terminal Blocks 16A with voltmeter included
+ 1 power supply Barrel Jack 5.5 X 2.1mm ,the most standard to plug in any kind of power supply
+ 1 terminal with 2 blocks that can be used as an input or an output power supply ( to wire it using 2 directly 2 wires or to daisy chain a couple of them ,let's see below for examples of use )  
The integrated voltmeter can handle about 3 to 30 VDC, Alternative current isn't supported; it can be removed and used everywhere if needed as it's only wired to its dedicated screw terminal block
It's mutipurpose and can be used everywhere including arcade cabinets,models,industry,etc...
€13.91

Including €0.01 for ecotax

Delivery within 3-4 days

Description

borniers de distribution à voltmètre intégré r2tronik fabriqué en France

Power Distribution 2 X 12 screw Terminal Blocks 16A with voltmeter included
+ 1 power supply Barrel Jack 5.5 X 2.1mm ,the most standard to plug in any kind of power supply
+ 1 terminal with 2 blocks that can be used as an input or an output power supply ( to wire it using 2 directly 2 wires or to daisy chain a couple of them ,let's see below for examples of use )  
The integrated voltmeter can handle about 3 to 30 VDC, Alternative current isn't supported; it can be removed and used everywhere if needed as it's only wired to its dedicated screw terminal block
It's mutipurpose and can be used everywhere including arcade cabinets,models,industry,etc...
The 12 X blue terminal blocks are all wired together to the + of the power supply
The 12 X black terminal blocks are all wired together to the - of the power supply
borniers de distribution r2tronik
The pcb is double sided engraved to ensure the best possible electrical conductivity ( the top and bottom sides of the PCB are both engraved) .
  The PCB has been designed to be the smallest possible,just to be able to be placed anywhere even in reducted spaces, sizes :
borniers de distribution r2tronik fabriqué en France

Soldered Terminal Blocks specifications :
ref : KF-301 
pitch : 5mm
16A max / terminal
Can connect wires from 22 to 14 AWG / 2,5mm2 Max 
4 X M3 standard holes permit to fix the PCB using PCB feets,spacers,etc...
Here are a couple of examples of use :

assemblage de borniers de distribution r2tronik avec entretoises et pieds de PCB

bornier de distribution r2tronik monté sur pieds de PCB

Thanks for watching,
Fabien

Data sheet

Borniers_distribution_voltmetreX2
0.04 kg
192 Items
0715235390924
715235390924
0715235390924