General features from V1 :
New features from V2 :
New Input Mapping , you can customize your mapping on all 3 or 6 buttons
New Output Mapping to be 100% compliant with all superguns and all SNK NeoGeo systems*
New adjust pot to adjust Autofire from 1 to 100 shots/second
Auto detect 3/6 buttons pad type
Hot swappable pads ,the new pad will be automatically detected
No versatile memory,you'll always recover your Input/Output Mappings until you change them .
The new V2 adapter is easy to use and the most versatile pad adapter ever released !
Input Mapping :
The mapping input let you change all buttons and place them wherever you want.
To change the mapping,just press the mapping button more than 2 seconds ;
The Led is going then to do a short blink once to ask you which is the button A/1 , press a button.
The Led is now going to blink twice to ask you which is the button B/2 , press a button.
... And so on until button F/6.
Your new input mapping is ready to be used
By default,buttons aren't in Autofire mode .
To swap any or multiple button(s) into autofire mode,just press start and this (these) button(s) during 1.5 seconds or more.
Do the same to remove the autofire mode for any button
Using the potentiometer you can also adjust the autofire mode from 1 to 100 shots / second depending on the game you're playing to .
Mapping Outputs (compatibility modes) :
Output Mappings available :
1- All Retroelectronik Superguns (ProGamer and Essential )
2- SNK NeoGeo CD / MVS consolized
3- Other superguns
Swap between Output Mappings :
By default,the output mapping is the Retroelectronik's one (1).
To swap between the Outputs mapping,just press the mapping button once and less than 2 seconds. The LED light will blink once,twice or three times to indicate the new current mapping used.
Output Mapping availables :
1- All Retroelectronik's MAK superguns
2- SNK NeoGeo CD and MVS multislots
3- Other MAK Superguns
Please note that if you want to play on an original SNK NEO GEO AES / CD system, you will need to use for example a NEO GEO Controller extension cable as the db15 included on the neogeo AES is not really standard as it needs a longer female connector to connect.